Solar panels are the primary component of a solar power system and are comprised of solar
cells which convert sunlight into direct current (DC) electricity via a process known as the
photovoltaic effect (PV).
We have installed solar
panels for homes and businesses throughout Southern California. We work only with the
most reputable solar panel manufacturers, so the solar panel system that we design, build
and install on your property will be guaranteed to produce the amount of energy that we say
it will for the next 20 years or longer.
Our long track record of serving San Diego and the rest of Southern California
since 2004 gives us the insight needed to know which solar panels to use and which to avoid,
as not all solar panels are created equal.
When determining what solar panels to use for our residential solar power installations, we adhere to a strict product selection criteria. Not just any solar panel can be included in a Sullivan Solar Panel system. We will only provide solar panels from manufacturers who are financially stable, have a proven track record, and are socially responsible.
Since we guarantee the performance of every system we sell for the first 10 years, we have a vested interest in making certain the solar panels we offer will perform as expected. The systems we install are designed and built to last over 25 years. With longevity and performance as fundamental criteria for selection, we will only deal with a handful of proven solar panel manufacturers.
Having been in the industry for as long as we have, we have watched as numerous solar manufacturers have come and gone. We are among the most established and reputable solar power companies and know how to maximize our customers' return on investment.
Solar panel technology is
not new. Silicon-based solar modules were first used commercially by Bell Laboratories in
the 1950 and solar power systems were originally used to bring small amounts of electricity
to remote areas. Solar panels later were also used to fuel space exploration as the United
States entered the space race in the 1960s. Interestingly, the original silicon-based solar
modules had conversion efficiencies of as little as six percent. Today’s silicon-based solar
panels have efficiencies as high as 25 percent.
In the past 60 years, solar power efficiencies have increased by an average
rate of approximately 2.6 percent each decade. Silicon-solar modules have a theoretical
maximum efficiency of 33 percent. As you can see, the belief that solar panels are going to
be infinitely more efficient in the coming years is misguided, as the efficiency of today’s
silicon solar modules is approaching its theoretical maximum.
The most expensive type of solar panels, monocrystalline solar panels are highly efficient in a variety of weather conditions and carry the longest lifespan. In fact, some monocrystalline solar panels installed in the 1950s are still functioning today. Sunpower is a leading manufacturer of these high-efficiency panels and Sullivan Solar Power is one of California’s top Sunpower dealers.
This type of solar panel does not function as well in shady areas, but they are more affordable and very efficient when placed in areas that receive lots of sunlight.
Kyocera is one of the largest poly-crystalline solar panel manufacturers in the world and Sullivan Solar Power is one of Kyocera’s largest dealers in the United States.
Sullivan Solar Power offers two of the best solar panel brands on the market; Sunpower for our high-efficiency offering and Kyocera for our standard efficiency offering.
Sunpower is an American company founded in 1985 with manufacturing throughout the world. Boasting one of the highest efficiency monocrystalline solar cells in the industry, Sunpower has panel conversion efficiencies as high as 24.1 percent. This means a more powerful system can be installed in a given area. As might be expected, higher efficiency also means incrementally higher cost. Sunpower provides a 25-year warranty on both the product (the panel construction) and on the rated power output of the panel. Sullivan Solar Power has installed Sunpower panels for UCSD, SDSU, the Catholic Diocese of San Diego and many other customers.
When a standard efficiency module can deliver the needed power output for a home, we use Kyocera solar panels to maximize the cost effectiveness of your solar energy systems. Kyocera has been manufacturing solar panels since 1979 while maintaining its United States headquarters in San Diego since 1969.
Kyocera broke the world record for poly-crystalline module efficiency in 2014 with over 18 percent. As one of Kyocera’s largest dealers in the United States, Sullivan Solar Power customers enjoy exclusive warranty treatment. Our customers receive both a 25- year product warranty and a 25-year output warranty, compared to the standard 10-year product warranty and 25-year panel output warranty available to customers of other solar power companies.
Kyocera acknowledged Sullivan’s commitment to quality as the rationale for providing our clients industry leading warranty protection. We have installed Kyocera solar panels for SDSU, City of Chula Vista, the Catholic Diocese of San Diego, the Port of San Diego, among others.
Solar manufacturers typically provide a warranty for the product (the hardware) and a separate warranty for the rated power (the output) of the product. Solar panels are built to last longer than 25 years. The product warranty covers the components of a solar module which includes the solar cells, the aluminum frame, internal bypass diodes, the electrical junction box, and the tempered glass surface. A standard solar panel warranty is 10 years on the parts and 25 years on the output, adjusted for degradation.
A power output warranty is based on how much power a panel produces over the life of the solar panel after taking into account solar cell degradation. As solar panels age, they can slowly degrade in efficiency, so solar power manufacturers often provide conservative ranges for power output to limit their exposure to warranty claims.
Most manufacturers warrant that the solar panel will produce a given percentage of the original rated power. This typically is 90% of the nameplate rating for the first 10 years and 80 percent for the next 15 years. This standard type of power output warranty is known as a stepped warranty, which allows for aggressive solar cell and solar panel output degradation over time.
Allowing aggressive solar panel degradation is not aligned with the best interests of our
customers, so we use only panels which have linear power output warranties. Our solar panel
manufacturers warrant the panels they provide our customers will not degrade any faster than
0.7% per year.
When contrasting the two warranty types, note that a stepped warranty can have
significant adverse financial impact on our customers, which does not align with our
objective of turning every customer into a solar advocate.
If a solar panel manufacturer provides a 10-year product warranty and a 25-year power output
warranty, buyer beware! Let’s say a solar manufacturer warrants its solar panels will
produce a given wattage for 25 years and also warrants the solar panel parts will last at
least 10 years.
If the solar panel stops producing power in year 11, the output warranty will kick in and the
panel will be replaced by the manufacturer, right? Not likely. If a bypass diode or other
component in a solar panel fails in year 11, the manufacturer product warranty is what will
determine the outcome.
In this case, the manufacturer would reject the claim and state the solar panel
is out of its product warranty term, leaving the cost of the replacement of the solar panel
to fall on the customer.
A solar panel power output warranty is not the same as a solar energy production guarantee.
Solar panels are rated in watts, which is a measure of instantaneous power. Solar energy is
measured in kilowatt-hours, which is a measure of power delivered over a period of time
A solar manufacturer warranty provides some level of protection that a solar panel will output a given wattage when it is exposed to light under standard testing conditions. This does not mean that the solar panel will produce a given amount of energy over time, or kilowatt-hours when it is installed in the real world.
Solar manufacturers warrant that their panels will produce power, but they
don’t guarantee that the contractor who installs them knows what they are doing and that the
system, comprised of their solar panels, will produce the energy that is promised by a solar
installation company, if any.
Solar panels are made of solar cells, which are a silicon semiconductor sandwich with a
positive and negative charged layer. When photons in sunlight hit the cell, a direct current
is created driving electrons from the negative charged silicon (n-type) to the positive
charged side of the “sandwich.” This direct current leaves the individual cell and combines
with the current from the other cells in a circuit contained within the solar panel.
Typically, there are three solar circuits in a solar module comprised of 20 cells a piece,
or 60 cells total (sometimes there are 80 cells in larger solar panels).
A typical solar power system is comprised of 12 to 30 solar panels for a home
and from 30 to hundreds of panels for a business or other large commercial installation.
Multiple solar panels connected together are known as a solar array, which can be connected
to one or more inverters so the inverters can be electrically connected to the public energy
grid. Learn more about how
solar power works.
Shade cast on a solar cell makes the solar cell shut down. That’s why it’s call solar power,
not shade power! In a solar power circuit, a shaded solar cell acts like a resistor and
current cannot flow through it effectively. Shaded solar cells get hot when they are shaded
and act like a resistor.
Therefore, bypass diodes are incorporated into the solar module so that if a portion of the
module is shaded, the shaded circuit will be bypassed. Each circuit of 20 cells has a bypass
diode connected to the circuit. The bypass diode provides a bypass circuit for solar current
if any of the three circuits encounter shading.
There is one bypass diode for each circuit for a total of three. This means if
one solar cell of a 20-cell circuit gets shaded, the entire 20-cell circuit gets bypassed.
In a 60-cell solar panel, this means one-third of the rated output gets lost if only a
portion of one cell gets shaded.
A bypass diode serves two important functions in a solar panel. It mitigates the impact of shade on production and keeps shaded cells from heating up. When a solar cell is shaded, it becomes a resistor and if the bypass diode does not function, the solar module will push current through the cell causing it to heat up.
As we have seen in numerous tests, a heated cell can crack the glass surface of a solar panel and can burn a hole through the back encapsulation of the panel. This can result in a fire hazard.
This is why it is imperative that solar power installations are done utilizing best practices as outlined by the North American Board of Certified Energy Practitioners (NABCEP). Improperly designed and installed solar power systems pose a hazard to persons and property. Properly designed and installed solar power systems subjected to a rigorous quality assurance and quality control program are inherently safer.
Solar cells subjected to shading before 9 am and after 3 pm will not generate the heat that could result in damage to the solar power system or its supporting structure (your home or business), in the unlikely event a bypass diode fails.
No, and here is why Sullivan Solar Power does not offer microinverters or AC modules as a
standard offering. We’re not like other companies, who offer microinverters and AC solar
modules as a means to bypass the entire conversation about the true impact of shade on a
solar power system and the long term detriment shade impact has on system longevity and
Microinverters do not mitigate the hazards of shade because those hazards occur at the cell
level and microinverters are attached downstream from the cells. The only benefit of a
microinverter is that it will limit the impact a shaded module has on performance of the
It will not limit the damage a shaded solar cell will wreak on a solar panel if
the cell is shaded during peak sun hours between 9 am and 3 pm.
Whether you want solar panels installed in San Diego, Orange County, or Riverside, Sullivan Solar Power has a team of highly qualified NABCEP certified experts nearby to help. We will use best practices to ensure your solar panels are installed correctly and will produce the most amount of solar energy possible given your site specifics.
Contact us today and we will provide a wealth of knowledge for your use in helping you decide how to declare energy independence.